Mechanical rhombic 2-ton jack h115-425mm SKYWAY with a rubber support part -The metal structure of the nodes and units provides high reliability and resistance to failure. The rubber pad on the support part of the product protects the body and frame surface from damage when lifting the car. Four hinge connecting levers forming a rhombus are used as load-bearing elements. The load is lifted by changing the angles between the levers, which leads to an increase or decrease in the distance between the pickup and the support platform. Attention! The weight of the lifted load should not exceed the load capacity of the tool. Install the jack only on a flat and sturdy surface. When lifting the load, make sure that the load falls on the center of the support platform. Specifications: Type - Mechanical rhombic Load capacity - 2 tons Maximum lifting height - 425 mm Minimum lifting height - 115 mm Net weight - 2.6 kg Included - storage bag Operating procedure: Install the jack under the car. The jack's support platform should be in the location specified in the car's operating instructions. Insert the handle hook into the hole of the lifting screw. Rotate the handle clockwise to lift the car to the desired height. Rotate the handle counterclockwise to lower the car. Precautions: The vehicle is parked with the parking brake engaged. The wheels are securely locked with wheel chocks. The jack housing and components do not have cracks, damage, or defects. Using the jack as a permanent support element is prohibited. Being under a car lifted with a jack. Moving loads lifted with a jack. Using foreign objects to increase the lifting height of the jack. Equipment: Rhombic jack - 1 piece. Handle - 1 piece. Bag - 1 piece. Instruction manual and warranty card - 1 piece.