Mechanical rhombic jack 2t h 110-420mm SKYWAY in a bag -The metal structure of the nodes and units provides high reliability and resistance to failure. The rubber pad on the supporting part of the product protects the body and frame surface from damage when lifting the vehicle. Four hinge-connecting levers forming a rhombus are used as load-bearing elements. The load is lifted by changing the angles between the levers, which leads to an increase or decrease in the distance between the support and the support pad. Attention! The weight of the lifted load should not exceed the capacity of the tool. Only install the jack on a flat and sturdy surface. When lifting the load, make sure that the load is on the center of the support pad. Technical specifications: Type - mechanical rhombic Loading capacity - 2 t Maximum lifting height - 420 mm Minimum lifting height - 110 mm Net weight - 2.6 kg Included - storage bag Operating procedure: Install the jack under the vehicle. The support pad of the jack should be placed in the location specified in the vehicle's operating instructions. Insert the handle hook into the threaded screw hole. Rotate the handle clockwise to lift the vehicle to the desired height. Rotate the handle counterclockwise to lower the vehicle. Precautions: The vehicle is parked with the parking brake engaged. The wheels are securely immobilized with wheel chocks. The jack body and components have no cracks, damages, or malfunctions. Using the jack as a permanent support element is prohibited. Being under the vehicle lifted by the jack. Moving loads lifted by the jack. Using external objects to increase the lifting height of the jack. Equipment: Rhombic jack - 1 pc. Handle - 1 pc. Bag - 1 pc. Instruction manual and warranty card - 1 pc.