Mechanical rhombic jack 1t h 90-330mm SKYWAY in a bag - The fully metal construction of nodes and units ensures high reliability and failure resistance. Four hinge-joint levers forming a rhombus are used as load-bearing elements. The load is lifted by changing the angles between the levers, which leads to an increase or decrease in the distance between the lifting point and the support platform. Attention! The weight of the lifted load should not exceed the carrying capacity of the tool. Install the jack only on a level and sturdy surface. When lifting the load, make sure the load is placed on the center of the support platform. Technical specifications: Carrying capacity - 1 ton Maximum lifting height - 330 mm Minimum lifting height - 90 mm Net weight - 2.0 kg Included - storage bag Operating procedure: Place the jack under the car. The support platform of the jack should be in the location indicated in the car's operating instructions. Insert the handle hook into the jack's screw hole. Rotate the handle clockwise to lift the car to the desired height. Rotate the handle counterclockwise to lower the car. Precautions: The vehicle is parked with the parking brake engaged. The wheels are securely fixed with chocks. The jack's body and components do not have any cracks, damages, or defects. Using the jack as a permanent support element is prohibited. Staying under the car lifted with the jack. Moving loads lifted with the jack. Using foreign objects to increase the lifting height of the jack. Equipment: Rhombic jack - 1 pc. Handle - 1 pc. Bag - 1 pc. Instruction manual and warranty certificate - 1 pc.