Mechanical rhombic jack 1.5t h 110-390mm SKYWAY in a bag - The metal construction of the units and assemblies ensures high reliability and resistance to failure. Four hinge-connecting levers forming a rhombus are used as supporting elements. The load is lifted by changing the angles between the levers, which leads to an increase or decrease in the distance between the lifting point and the support platform. Attention! The weight of the lifted load must not exceed the lifting capacity of the tool. Only install the jack on a flat and sturdy surface. When lifting the load, make sure that the load is centered on the support platform. Technical specifications: Type - mechanical rhombic. Load capacity - 1.5t Maximum lifting height - 390mm Minimum lifting height - 110mm Net weight - 2.3kg Includes a storage bag Operating instructions: Place the jack under the vehicle. The jack's support platform should be positioned as indicated in the vehicle's operating instructions. Insert the handle hook into the hole of the lifting screw. Rotate the handle clockwise to lift the vehicle to the desired height. Rotate the handle counterclockwise to lower the vehicle. Precautions: The vehicle must be parked with the parking brake engaged. The wheels should be securely fixed with chocks. The jack's housing and components must be free of cracks or other damage or defects. Using the jack as a permanent support element is prohibited. Remaining under the vehicle lifted by the jack. Moving loads lifted by the jack. Using foreign objects to increase the lifting height of the jack. Components: Rhombic jack - 1 piece. Handle - 1 piece. Bag - 1 piece. Instruction manual and warranty card - 1 piece.