Designed for anti-corrosion protection of hidden cavities in the bodies of vehicles with significant service life: doors, sills, side members, etc. Forms a coating with pronounced hydrophobic properties, deeply penetrates into rust spots and stops corrosion. When applied to the surface, it displaces moisture and forms a wax-like film with a thickness of 30-40 μm. It can be applied to wet and rusty surfaces, as well as old anti-corrosion coatings. It does not have a negative impact on paint coatings, rubber, and plastic. It practically does not drip from vertical surfaces. The can is equipped with a spray pipe with six holes arranged in a circle. The pipe is made of elastic material, allowing it to be bent 360°. The length of the pipe allows cutting it into tubes of various lengths if necessary. Instructions for use: Use at temperatures not lower than +10°C. Shake the can vigorously for 1-2 minutes after the ball inside starts to rattle. Apply the composition, if possible, to a surface previously cleaned of loose layers of rust, using the supplied tube, which ensures uniform spraying in hidden cavities (film formation time - 40 minutes). It is recommended to apply 2-3 layers with intermediate drying of 10-15 minutes. To avoid getting traces of the composition on untreated surfaces, it is recommended to protect them. If necessary, remove from the paint coating using AVS Crystal asphalt stain remover. Attention! To avoid clogging the spray nozzle, it is recommended to turn the can upside down after finishing work and spray until only clean gas comes out. Precautions: Flammable! Under pressure! Do not disassemble, puncture, or burn. Protect from direct sunlight and temperatures above 50°C! Do not spray near an open flame or hot objects! If it gets on the skin or in the eyes, rinse with water! Use in well-ventilated areas. Use skin, eye, and respiratory protection! Keep out of the reach of children! Avoid product entry into water bodies and soil! Do not burn after use! Dispose of the used can as household waste. Does not contain ozone-depleting refrigerants. Net weight: 260 g Volume: 520 ml Composition: Organic solvent >30%, petroleum resin 5-15%, industrial oil ≥5%, synthetic wax ≥5%, anti-corrosion additives <5%, hydrocarbon propellant <15%.