Provides double anti-corrosion protection to hidden cavities thanks to the zinc content. Protects against the formation of electrochemical corrosion spots. Creates a gel-like elastic coating, stable over a wide range of working temperatures - does not drip from vertical surfaces when heated and does not crack during temperature changes. Does not negatively affect paint coatings, rubber, and plastic. After drying, it forms a waxy film with a thickness of 30-40 micrometers with barrier and cathodic properties. Can be applied to wet, rusty surfaces, as well as to old anti-corrosion coatings. Maintains high protective anti-corrosion properties throughout the vehicle's lifespan. The can is equipped with a spray tube with a nozzle that has 6 holes arranged in a circle. The tube is made of elastic material, allowing it to be bent 360°. The length of the tube allows for cutting tubes of different lengths if necessary. Application method: Use at temperatures not below +10°C. Shake the can vigorously for 1-2 minutes after the ball rattle is heard before using. Apply the product, if possible, to a surface that has been pre-cleaned of loose rust layers, using the provided tube, which ensures even spraying in hidden cavities (film formation time - 40 minutes). It is recommended to apply 2-3 coats with intermediate drying of 10-15 minutes. To avoid getting traces of the product on untreated surfaces, it is recommended to protect them. If necessary, remove from paint coatings using AVS Crystal bitumen stain remover. Attention! To avoid nozzle clogging, it is recommended to turn the can upside down after finishing work and spray until only clean gas comes out. Safety precautions: Flammable! Contents under pressure! Do not disassemble, puncture or burn. Protect from direct sunlight and heating above 50°C! Do not spray near open flames or hot objects! Rinse with water if product comes into contact with skin or eyes! Use in well-ventilated areas. Use skin, eye, and respiratory protection. Keep out of the reach of children. Avoid product entering water bodies and soil. Do not burn after use! Properly dispose of used cans as household waste. Does not contain ozone-depleting refrigerants. Volume: 520 ml Composition: Organic solvent >30%, petroleum polymer resin 5-15%, industrial oil ≥5%, synthetic wax ≥5%, anti-corrosion additives <5%, zinc salts <5%, hydrocarbon propellant <15%.