Movil is a reliable preservative for body cavities and vehicle parts. It is used for anti-corrosion protection of hidden body cavities of a car (sills, door shells, pillars, chassis, floor, trunk, etc.). It can be applied on wet or rusty surfaces, as well as on old anti-corrosion coatings. Upon contact with the surface, it displaces moisture and forms a wax-like film with a thickness of 30-40 μm. It hardly drips from vertical surfaces. The can is equipped with a spray tube with a nozzle that has 6 holes arranged in a circle. The tube is made of elastic material, allowing it to be bent at 360°. The length of the tube allows for cutting it into tubes of different lengths if needed. Application method: Use at a temperature not lower than +10°C. Shake the can vigorously for 1-2 minutes after the ball rattles before use. Apply the product, if possible, on a surface that has been previously cleaned of loose rust layers, using the supplied tube, which ensures even spraying in hidden cavities (film formation time - 40 minutes). It is recommended to apply 2-3 layers with intermediate drying of 10-15 minutes. To avoid getting traces of the product on untreated surfaces, it is recommended to protect them. If necessary, remove from the paintwork using AVS Crystal bitumen stain remover. Attention! To avoid clogging of the spray nozzle, it is recommended to turn the can upside down and spray until clean gas comes out after work is completed. Precautions: Flammable! Contents under pressure! Do not disassemble, pierce, or burn. Protect from direct sunlight and heating above 50°C! Do not spray near open flame or hot objects! If it gets on the skin or in the eyes, rinse with water! Use in a well-ventilated area. Use skin, eye, and respiratory protection! Keep out of reach of children! Avoid product entry into water bodies and soil! Do not burn after use! Dispose of the used can as household waste. Does not contain ozone-depleting refrigerants. Net weight: 260 g Volume: 520 ml Composition: Organic solvent >30%, petroleum resin - 5-15%, industrial oil - 5-15%, synthetic wax - 5-15%, corrosion inhibitor <5%, hydrocarbon propellant <15%.