The AVS anti-gravel is designed for effective protection of the lower part of the car body (wheel arches, thresholds, fender, bottom, etc.) from damage caused by particles and road reagents flying from under the wheels. It forms a resilient elastic gray coating. Significantly extends the service life of the body. It does not delaminate or lose elasticity during sharp temperature changes and in severe frost. Dries quickly, has good adhesion, can be painted with any type of paint after drying. Provides additional sound insulation. Application method: Shake the can vigorously for 1-2 minutes after the ball inside starts rattling. Protect areas that will not be treated in advance. Clean, wash, and dry the surface before application. For better results, it is recommended to degrease with AVS Crystal universal degreaser. Spray evenly onto the surface from a distance of at least 20 cm. Let it partially dry and spray 2-3 more layers for a higher quality coating. The interval between layer drying is 10-15 minutes. The coating is ready for use after 2 hours. Full drying time is 24 hours. When applying, the air temperature should be between +10°C and +30°C. At low temperatures, the pressure in the can decreases, which may make spraying the contents difficult or impossible. Attention! To prevent clogging of the spray head, it is recommended to turn the can upside down after each layer and spray until only clean gas comes out. Precautions: Flammable! Under pressure! Do not disassemble, puncture, or burn. Protect from direct sunlight and heat above 50°C! Do not spray near open flame or hot objects! If it comes into contact with skin or eyes, wash with water! Use in a well-ventilated area. Use skin protection, eye protection, and respiratory protection! Store in a place inaccessible to children! Avoid product contamination of water bodies and soil! Do not burn after use! Dispose of used cans as household waste. Contains no ozone-depleting refrigerants. Transportation and storage conditions: It is recommended to transport the product at temperatures from -5°C to +35°C. Store in a dry, well-ventilated room, at a distance of at least 1 m from heaters and other sources of heat, at temperatures from +5°C to +35°C. Ensure packaging integrity. Do not allow freezing. Color: gray Type: aerosol Volume: 520 ml Composition: Organic solvent >30%, propane-butane >30%, pigments and fillers 5-30%, synthetic resin 5-15%, modified rubber 5-15%, anti-corrosion additives <5%.