Highly concentrated product for professional contactless cleaning of passenger and commercial vehicles. Thanks to its increased cleaning ability, the product quickly and effectively removes the toughest and most difficult dirt: salt, organic, inorganic deposits, oily streaks. Creates a stable abundant foam that is easily rinsed with water and does not leave streaks. Due to its formula, the car shampoo does not lose its cleaning properties even in water with a high salt content. Contains a corrosion inhibitor. Can be used in dosatron systems. Application method: The product should be diluted with water according to the following ratios: For a foam kit: 100-150 g diluted with water at a ratio of 1:5-1:9 depending on the level of dirt For a foam generator (25, 50, 100 L): 8-15 g per 1 L diluted with water at a ratio of 1:60-1:110 depending on the level of dirt For dosing systems (DOZATRON), use a dosage of 1-3%. The average consumption per passenger car is 50-80 g. Remove loose dirt from the surface and apply the diluted solution from bottom to top to avoid streaks. Leave on for 1-2 minutes, avoiding drying out. Rinse with high-pressure water. Increasing the concentration of the product for heavily soiled surfaces is allowed. IMPORTANT! Do not allow the solution to dry on the car body. Do not apply to a heated surface. Precautions: CAUTION! When working with the shampoo, it is recommended to use personal protective equipment (protective clothing, rubber gloves). Use in a well-ventilated area. If the product comes into contact with the skin or eyes, rinse them thoroughly with running water. It is not recommended for use on cars with damaged paintwork. Keep out of reach of children! Do not swallow. Transportation and storage conditions: Protect from sunlight. Store in a tightly closed container, separate from food products at a temperature of +5 to +25°C. If the car shampoo freezes during transportation in winter, it fully regains its properties after thawing. Depending on the storage conditions, the intensity of the car shampoo's color may change, but it does not affect the product's consumer properties. Type: bottle Volume: 1 L Composition: Desalinated water ≥30%, anionic surfactants (APAV) 5-15%, non-ionic surfactants (NPAV) ≥5%, sodium hydroxide ≤5%, chelating agents ≤10%, organic solvents ≤5%, functional additives ≤5%.